Accessories – Steamfreak Models

VR Locomotive Number Plates

Trevor — Thu, 11 Jul 2024 23:31:39 +0000

Number plates in the VR cast-metal style. Available in older fancy serif-font style, or later sans-serif style. If you need a combination of both, please specify in the order notes. Some locos ran with a combination of both at various times. These are resin printed in white resin and are unpainted.

Includes:

2 x cabside plates (class & number on same plate)
1 x tender plate (class & number on same plate)
1 x set of buffer beam plates (class & number separate)
A couple of spares

Cabside-only or front/rear plates only available as options.

VR Platform Facing – O Scale

Trevor — Thu, 11 Jul 2024 22:52:39 +0000

Platform facing 400mm segment

VR Mileposts (6-pack)

Trevor — Fri, 07 Jun 2024 01:13:37 +0000

Victorian Railways mileposts showing the distance from Melbourne. Old-style (numbers vertically down the post) and new-style (numbers horizontally across the post) are both available. Specify which numbers you need in the options.

Goods shed support posts (pack of 50)

Trevor — Wed, 12 Apr 2023 07:41:25 +0000

Resin-printed cast concrete support posts commonly used for goods sheds. Pack of 50.

VR Point Indicator – 6 Pack

Trevor — Thu, 21 Jul 2022 07:44:42 +0000

Very common point indicator found in station yards and sidings around the VR network.

VR Lineside Relay Box – 6 pack – O Scale

Trevor — Tue, 07 Dec 2021 04:11:42 +0000

Relay box often found near level crossings and other electrical installations.

VR Buffer Stop 6-pack O Scale

Trevor — Wed, 06 Oct 2021 00:57:51 +0000

Typical VR timber buffer stops

VR Crossing Gates 26′ (Pair)

Trevor — Tue, 07 Sep 2021 10:34:19 +0000

VR old-style crossing gates – 26′. Includes main posts, gates and end posts.

5′ Picket Fence

Trevor — Mon, 23 Aug 2021 12:40:11 +0000

5' high picket fence as used for platform fencing and other locations. Includes:

142mm long section incorporating closed double gate
142mm section with separate double gate pieces that can be glued in various open/closed positions
150mm of continuous fencing

VR Lineside Relay Box – 6 pack

Trevor — Wed, 09 Jun 2021 07:43:06 +0000

Relay box often found near level crossings and other electrical installations.

VR Platform Lamp Post – 6 pack

Trevor — Wed, 09 Jun 2021 07:39:25 +0000

Old style platform lamp post found on many Victorian Railways stations in the early to mid-1900’s. These are in two parts – a hollow post and a lamp piece that fits on the top. A micro-LED can be inserted into the lamp, with the wires threaded down the post.

The micro-LEDs can be purchased here:
https://www.ebay.com.au/itm/383214316291

(Photo courtesy of Murray McIntosh)

VR Spur Point Lever – 6 Pack

Trevor — Sun, 11 Apr 2021 00:24:13 +0000

Very common point lever found in station yards and sidings around the VR network. Comes mounted on “sleepers”, needs rodding added to suit the layout (not included).

VR MPH Curve Speed Signs (6-pack)

Trevor — Thu, 25 Mar 2021 12:03:31 +0000

Thes signs were seen all over, particularly on branch lines with tight curves. Avalable in 5MPH t0 90MPH in 5MPH increments. The letters are slightly raised to make painting easier. Please specify in the options which mix you would like and which direction (L or R) – e.g. 2 x 5R, 2 x 20L, 2 x 20R.

VR Whistle Board (6 pack)

Trevor — Thu, 25 Mar 2021 12:00:23 +0000

VR whistle board as placed a quarter mile from a level crossing. These signs were everywhere, and similar are still in use today.

VR Crossing Gates 15′ (Pair)

Trevor — Thu, 25 Mar 2021 11:55:15 +0000

VR old-style crossing gates – 15′. Includes main posts, gates and end posts.

VR Railway Crossing Sign (pair)

Trevor — Thu, 25 Mar 2021 11:52:26 +0000

This style of crossing sign was in use until the mid-1950’s. Letters are slightly raised to make painting easier.

VR WSA Point Lever – 6 Pack

Trevor — Thu, 25 Mar 2021 11:42:59 +0000

Very common point lever found in station yards and sidings around the VR network. Comes mounted on “sleepers”, available in either position – Left (with the spring cylinder up) or Right (with the spring cylinder down).

Thanks to Matt Scott for the photos.

VR Platform Facing

Trevor — Fri, 21 Aug 2020 12:16:25 +0000

Platform facing 170mm segment

VR Platform Awning including 2 supports

Trevor — Fri, 21 Aug 2020 12:16:25 +0000

Typical VR station awning including 2 supports. Support angle for roof higher at platform side

VR Platform Awning Supports

Trevor — Fri, 21 Aug 2020 12:16:24 +0000

Typical VR station awning supports x 2. Support angle for roof higher at platform side